Cisco VOICE LAB KIT equipment (CCNA, CCNP)

Description

All Products are fully tested.
30  Days Warranty
Please contact us, if you have any question.
1(972)-423-6829
Why do I need to buy Hyper Networks Cisco LAB KITs?
Firstly; Cisco made CCNA 200-125 V3 exam harder than the CCNA 200-120 V2 exam.
Cisco wants to make sure you really know your stuff on this exam. CCNA 200-125 V3 exam includes
multiple choice, multiple answer, drag-n-drop, interactive router simulations, testlet and simlet question
types. Especially, you need to study with actual devices for understanding interactive router simulations, testlet and simlet question
types. You need to have
a high-level understanding of what is happening for passing the exam. You need to practice on more complex setups and you need to understand very well what is happening. That is why we set up these lab kits and provide you to work with actual devices.
Why do I need a physical router?
You need a physical router because:
*The simulators don't have the ability to give you the hands on.
*You need to see what happens when you disconnect a cable.
*You may put a cable in the wrong location or just plain configure the interface incorrectly.
*Dependent on what you do by mistake, you may see either the interface or protocol go down.
*You can do troubleshoot based upon that it should give you a clue of where to start troubleshooting.
*You can see what layer is the interface at and what layer is the protocol at.
* You can find quite quickly which mistakes you make on Router 1 which can affects other Routers.
*No simulator can simulate that, so real routers and switches are invaluable.
Included Items in the lab:
1x CISCO2821 Router [256MB Dram/128MB Flash] with
2x Gigabit Ethernet Ports
CALL MANAGER EXPRESS 8.6
Switches:
1xWS-C3550-24PWR-SMI POE SWITCH
VIOP IP PHONES:
2x CISCO CP-7940G VOIP Phone
Cables:
1x DB9 to RJ45 Console Cable
3x Ethernet Cable
2x Power Cable
Bonus DVD:
1x DVD
- SDM Software
- TFTP Software
- Lab examples, questions and answers, manuals, configuration examples.
DESKTOP RACK WITH RACK EARS ON SALE FOR ADDITIONAL . IF YOU WILLING TO PURCHASE PLEASE LET US KNOW AFTER YOU MAKE YOUR PURCHASE.
How Many Routers Do I Need for my Cisco CCNA Lab?
Let`s explain to you what you can do with one, two or three routers.
One router
will give you the ability to run the commands on it and will allow you to memorize the correct syntax and context in which to run the commands.
Two routers will allow you to be able to see route table information propagate, data propagation and path election. In addition, you will see basic device elections.
Three or more routers and you will get all the above, more complex topologies and full device elections.
We strongly suggest you buy three router kits.
How Many Switches Do I Need for my Cisco CCNA Lab?
Let`s explain to you what you can do with one, two or three switches.
One switch
will give you the ability to run the commands on the switch and allow you to memorize the correct syntax and context in which to run the commands. It will also allow you to do some of the VLAN labs.
Two switches will allow you to see VTP Domain & VLAN information propagate. In addition, you will see basic device elections.
Three or more switches you will get all the above and full device elections.
We suggest to you buy our three switch lab kits because of having the best learning experience.
Please contact us, if you have any question.
1(972)-423-6829